test(v16): 网络脚本回归断言 8 条（把事故根因变成防线）

针对本次真机事故（机器掉 APIPA 失联）逐条设防：
- apply 必须先 New-NetIPAddress 再 Remove-NetIPAddress（顺序颠倒 → already exists → 无地址）
- 建默认路由前必须先 Remove-NetRoute（否则 New-NetRoute 报实例已存在）
- 断言脚本里**不得出现** netsh set address / set dnsservers（Win11 上会挂起）
- 自检片段必须校验目标地址并在失败时执行回滚（自愈）
- 回滚脚本同样受「先加后清 / 先清路由」约束，且必须恢复原地址/网关/DNS
- DHCP 快照的回滚走 -Dhcp Enabled，不得写静态地址
- 掩码→前缀换算边界（含非法输入回退）

单测 116 -> 124

apps/agent/src/capabilities/network.ts

@@ -96,7 +96,7 @@ export function maskToPrefix(mask: string): number {
 }
 
 /** 结构化快照（回滚脚本据此用**原生 cmdlet** 重建配置）。 */
-interface IfaceSnapshot {
+export interface IfaceSnapshot {
   alias: string;
   dhcp: boolean;
   ipv4: Array<{ ip: string; prefix: number }>;
@@ -143,7 +143,7 @@ $o | ConvertTo-Json -Compress -Depth 4
 }
 
 /** 由结构化快照生成**原生 cmdlet** 回滚脚本（不用 netsh set —— 它在 Win11 上会挂起）。 */
-function buildRollbackScript(snap: IfaceSnapshot, backupTxt: string, logPath: string): string {
+export function buildRollbackScript(snap: IfaceSnapshot, backupTxt: string, logPath: string): string {
   const a = JSON.stringify(snap.alias);
   const L = JSON.stringify(logPath);
   const lines = [
@@ -384,7 +384,7 @@ export async function netApply(args: Args): Promise<unknown> {
  * 而 `Set-NetIPAddress` / `Set-NetIPInterface` / `Set-DnsClientServerAddress` 同场景 <1s。
  * netsh 仅保留用于「读取」与人工恢复用的 dump 备份（对操作者友好）。
  */
-function buildApplyCommand(mode: string, iface: string, args: Args, snap: IfaceSnapshot): string {
+export function buildApplyCommand(mode: string, iface: string, args: Args, snap: IfaceSnapshot): string {
   const a = JSON.stringify(iface);
   if (mode === 'command') {
     const cmd = args['command'] as string | undefined;
@@ -443,7 +443,7 @@ function buildApplyCommand(mode: string, iface: string, args: Args, snap: IfaceS
  * ⚠️ 这段是**事故换来的**：没有自检时，变更失败会静默把机器留在「无地址」状态，
  * 而调用方还以为变更成功了（真机事故：机器掉到 APIPA 彻底失联）。
  */
-function buildSelfCheck(iface: string, expectIp: string | null, rollbackScriptPath: string): string {
+export function buildSelfCheck(iface: string, expectIp: string | null, rollbackScriptPath: string): string {
   const a = JSON.stringify(iface);
   const rb = JSON.stringify(rollbackScriptPath);
   const cond = expectIp

tests/unit/net-scripts.test.mjs

@@ -0,0 +1,91 @@
+import { test } from 'node:test';
+import assert from 'node:assert/strict';
+import {
+  buildApplyCommand,
+  buildRollbackScript,
+  buildSelfCheck,
+  maskToPrefix,
+} from '../../apps/agent/dist/capabilities/network.js';
+
+const snap = {
+  alias: 'Ethernet',
+  dhcp: false,
+  ipv4: [{ ip: '192.168.1.100', prefix: 24 }],
+  gateway: ['192.168.0.1'],
+  dns: ['223.5.5.5'],
+};
+const args = { mode: 'static', ip: '192.168.1.100', mask: '255.255.255.0', gateway: '192.168.0.1' };
+
+test('掩码换算：常见掩码与前缀长度互转', () => {
+  assert.equal(maskToPrefix('255.255.255.0'), 24);
+  assert.equal(maskToPrefix('255.255.0.0'), 16);
+  assert.equal(maskToPrefix('255.255.255.192'), 26);
+  assert.equal(maskToPrefix('255.255.255.255'), 32);
+  assert.equal(maskToPrefix('乱码'), 24, '非法输入回退 24');
+});
+
+/**
+ * 真机事故回归：曾经「先删旧地址 → 再加新地址」，Windows 残留的默认路由让
+ * New-NetIPAddress 报 already exists → 新地址没加上 → 机器掉到 APIPA 彻底失联。
+ * 下面几条断言就是那道防线。
+ */
+test('apply(static)：必须先加新地址、再清旧地址（顺序不可颠倒）', () => {
+  const script = buildApplyCommand('static', 'Ethernet', args, snap);
+  const iAdd = script.indexOf('New-NetIPAddress');
+  const iRemove = script.indexOf('Remove-NetIPAddress');
+  assert.ok(iAdd > 0 && iRemove > 0, '既要加也要清');
+  assert.ok(iAdd < iRemove, '必须先 New-NetIPAddress 后 Remove-NetIPAddress（事故根因）');
+});
+
+test('apply(static)：建路由之前必须先清掉旧默认路由（否则 already exists）', () => {
+  const script = buildApplyCommand('static', 'Ethernet', args, snap);
+  const iRmRoute = script.indexOf('Remove-NetRoute');
+  const iAddRoute = script.indexOf('New-NetRoute');
+  assert.ok(iRmRoute > 0, '必须显式清理默认路由');
+  assert.ok(iAddRoute > 0, '必须重建默认路由');
+  assert.ok(iRmRoute < iAddRoute, 'Remove-NetRoute 必须在 New-NetRoute 之前');
+});
+
+test('apply：不得使用会在 Win11 挂起的 netsh set address', () => {
+  const staticScript = buildApplyCommand('static', 'Ethernet', args, snap);
+  const dhcpScript = buildApplyCommand('dhcp', 'Ethernet', { mode: 'dhcp' }, snap);
+  for (const s of [staticScript, dhcpScript]) {
+    assert.ok(!/netsh interface ipv4 set address/.test(s), 'netsh set address 在 Win11 会挂起（真机实测）');
+    assert.ok(!/netsh interface ipv4 set dnsservers/.test(s), 'netsh set dnsservers 同类问题');
+  }
+  assert.match(staticScript, /Set-NetIPInterface|New-NetIPAddress/, '应使用原生 cmdlet');
+});
+
+test('apply(dhcp)：切 DHCP 用原生 cmdlet', () => {
+  const s = buildApplyCommand('dhcp', 'Ethernet', { mode: 'dhcp' }, snap);
+  assert.match(s, /Set-NetIPInterface -InterfaceAlias "Ethernet" -Dhcp Enabled/);
+  assert.match(s, /Set-DnsClientServerAddress/);
+});
+
+test('自检：失败时自动执行回滚脚本（自愈）', () => {
+  const chk = buildSelfCheck('Ethernet', '192.168.1.100', 'C:/rb.ps1');
+  assert.match(chk, /Get-NetIPAddress/);
+  assert.match(chk, /192\.168\.0\.88/, '应校验目标地址是否真的生效');
+  assert.match(chk, /selfcheck FAILED -> auto rollback/);
+  assert.match(chk, /& "C:\/rb\.ps1"/, '失败必须回滚，而不是把机器留在无地址状态');
+});
+
+test('rollback：同样先加后清 + 先清路由（否则回滚自己也会失败）', () => {
+  const rb = buildRollbackScript(snap, 'C:/backup.txt', 'C:/rb.log');
+  const iAdd = rb.indexOf('New-NetIPAddress');
+  const iRemove = rb.indexOf('Remove-NetIPAddress');
+  const iRmRoute = rb.indexOf('Remove-NetRoute');
+  const iAddRoute = rb.indexOf('New-NetRoute');
+  assert.ok(iAdd < iRemove, '回滚也必须先加后清');
+  assert.ok(iRmRoute < iAddRoute, '回滚也必须先清路由');
+  assert.match(rb, /192\.168\.0\.159/, '必须恢复快照里的原地址');
+  assert.match(rb, /192\.168\.0\.1/, '必须恢复原网关');
+  assert.match(rb, /223\.5\.5\.5/, '必须恢复原 DNS');
+  assert.ok(!/netsh -f/.test(rb), '不得用 netsh -f 回滚（备份编码 + set address 双重问题）');
+});
+
+test('rollback：DHCP 快照走「切回 DHCP」而非设静态', () => {
+  const rb = buildRollbackScript({ ...snap, dhcp: true, ipv4: [] }, 'C:/backup.txt', 'C:/rb.log');
+  assert.match(rb, /-Dhcp Enabled/);
+  assert.ok(!/New-NetIPAddress/.test(rb), 'DHCP 快照不应写静态地址');
+});